Appelez pour le prix
Localisation de la machine:1155 E Laurel AveHavana, Illinois, États-Unis 62644
Information sur le vendeur
Voir les informations du vendeur
Général
Année
2024
fabricant
Modèle
Heures
1
Numéro de série
416404431
Compteur d'heures
Exact / Vérifié
Etat
Neuf
Garantie
Oui
Numéro de Stock
36090
L'état de fonctionnement
Utilisable
Description
BRAND NEW QUEST E SERIES 50" ZERO TURN MOWER
KEY FEATURES
• Deck is easily removed for servicing.
• Hydrostatic control: Hydro-Gear®
ZT-2100
• Standard engine guard for extra protection.
• Spring-supported seat for operator comfort.
• 3-gallon fuel tank with single fill location.
• Ground speeds up to 7 mph
POWER COMPONENTS
Engines – Kohler 7000 Series KT725; governed to 3,300 rpm.
Air Filter – Standard Engine Manufacturer's air filter.
Drive System – Two Hydro-Gear ZT-2100 hydro static transmissions
with no hoses and integrated cooling fans and integrated reservoir.
Hydro Fluid – Exmark Premium Hydro.
Speed – Infinitely variable speed selection from 0–7.0 mph (11.3
kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
PTO Engagement – MagStop electromagnetic 80 ft-lbs. clutch.
Fuel Capacity – 3.0-gallon (11.0-L) single fuel tank with single fill
location.
Drive-Wheel Release – Standard - allows unit movement without
engine running.
Safety Package – Operator Presence Controls (OPC) and drive
system interlock.
Rollover Protection System (ROPS) – Optional Rigid ROPS with seat
belt and latch.
Deck Lift – Standard; hand lever deck lift changes cutting height and
lifts the deck to maneuver around obstacles, or place in transport
position. Foot assist on 50" model.
DECKS
Style – Series 2 fabricated and welded steel deck. Decks have sidedischarge standard with the option to bag or mulch.
Widths Available – 42" (107 cm) and 50" (127 cm).
Deck Construction – Series 2 units have 10-gauge top that is formed
and welded, 12-gauge side skirt and 7-gauge welded bumper. 3
point suspension.
Cutting Height – 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm)
increments, adjustable from operator seat with standard hand lever
lift.
Blade Spindles – No maintenance, sealed and non-greasable
spindles. 5.50"-diameter cutter housing with 17mm- (.67") diameter
spindle shaft.
Blade-Tip Speed – Approximately 18,500 fpm.
EQUIPMENT
Tractor Frame – Unibody, riveted 10-gauge steel.
Steering and Motion Control – Hydraulically dampened twin levers,
adjustable both fore and aft. Levers are also adjustable to 2-height
positions.
Casters – .25" thick caster yoke arms.
Front Caster Tires – 11 x 4–5 smooth pneumatic on 42" unit. 11 x 6
smooth pneumatic on 50" unit.
Drive Tires – 18 x 7.50–8, 4-ply Turf Tech TL on 42" unit. 18 x 9.5-8
K500 on 50" unit.
Turning Radius – True zero-turn.
Parking Brake – Automatic-actuated pawl brake.
Seat Comfort – Units have 16" high-back (no armrests). Hinged
mounting with spring suspension. Adjustment fore and aft 3" by
loosening 2 bolts and sliding seat.
Electrical – 12-volt battery with 15-amp alternator.
Standard Features – Cup holder and hitch.
Optional Features – Hour meter and seat armrests
capacités
Capacité en carburant
11.36 L
catégorie spécifique
Type de tondeuse
Residential
Cutting Width
127 cms
Hauteur minimale de coupe
3.81 cms
Hauteur maximale de coupe
11.43 cms
Engagement de la PDF
Electrique
Nombre de lames
3
Emplacement de la plate-forme
Mid-Mount
Type de décharge de la plate-forme
latérale
Construction de plate-forme
Fabricated
Style de la plate-forme
Flottante
Système de levage de la plate-forme
Mechanical
Commande de l’opérateur
Lap Bars
Piles incluses
Piles incluses
châssis
Bande de roulement pour roue d’entraînement
Turf
Bande de roulement pour roulette
Smooth
groupe motopropulseur (GMP)
Type de transmission
Hydro
Moteur
Fabricant de Moteur
KOHLER
Modèle de Moteur
KT725
Type de carburant
Gas
dimension de l'envoie
Longueur (pour expédier)
190.5 cms
Largeur (pour expédier)
156.72 cms
Hauteur (pour expédier)
115.82 cms
Poids
261.27 kg